Polymeric Waterproofing Solution
Offered by Antrix is a broad range of Polymeric Waterproofing Solution (Polyalk WP). These chemicals are easily mixed with cement forming an impermeable co-matrix film and are highly used in sunk portions of bathrooms, toilets & balconies. Moreover, these chemicals are used in flooring and external walls. This is a highly effective and proven polymeric waterproofing solution.

Uses:
Roof slabs – flat or sloping, chajjas, folded plate roofs, vaulted roofs and domes
Overhead or underground water tanks and other large reservoirs
Mortars for filling joints of C. I. or any other drainage pipes
As an admixture for providing waterproof plaster to external walls especially in high rise buildings
As waterproof additive to any cement based paints used as a finishing coat.

Advantages:
High flexural strength and extraordinary adhesion of polymer reinforces the high compressive strength property of cementitious matrix
Alkaline and compatible with concrete
Does not facilitate carbonation
Can be applied in moist conditions e.g: exteriors, terraces and chajjas in wet spells of monsoon and underground

Polyurethane Elastomeric Membrane (FLEXIROOF PU)
Antrix Constructions is engaged in offering our clients an immaculate range of Polyurethane Elastomeric Membrane (Flexiroof PU). This is a single component moisture cured, modified and polyurethane elastomeric membrane for the waterproofing of different surfaces. Our products cure to a rough rubber like finish with excellent flexibility.

Salient Features:
Easy to apply by brush, roller or spray
Offers seamless waterproofing unlike sheet type membranes
Adheres strongly to the surface of concrete and remains flexible under extreme temperature conditions
Owing to its simple application procedure, there is a significant reduction in labor cost and application time

Applications:
Flexiroof PU is ideally suited for the water proofing of two course concrete slab construction for shopping malls, parking garages, decks, plaza areas and bridge decks
It is ideal for waterproofing under terrazzo or tile floors, kitchens, under shower pans and bathroom floors
This is also used in water storage tanks and in the interior of elevated swimming pools

Bituminous Emulsion (Polyalk WPB)
Antrix are instrumental in offering our clients a wide range of Bituminous Emulsion (Polyalk WPB). The Polyalk WPB offered by us is a polymer modified bituminous emulsion, which is specifically developed to act as permanent barrier to water under pressure. It has additive contents that ensure proper adhesion to green concrete and masonry surfaces.

Uses:
Used as foundation coating for below grade structural foundation walls and floor walls
These are also used for slabs, ramp retaining walls, silos, copings and cornices

Advantages:
Economical water barrier
Unaffected by temperature changes
No sagging or flowing on vertical surfaces
Ready to use – requires no heating or thinning
Not affected by alkalies or organic matter in soils

Waterproofing Chemical (Polyalk WCR)
Avail from Antrix Constructions a comprehensive gamut of Waterproofing Chemical (Polyalk WCR). The Polyalk WCR offered by us is an economical, waterproofing system. This system is precisely processes at our vendor’s unit in the form of dry powder. Our product is a perfect mixture of portland cement and very fine treated silica sand as well as varied active special chemicals. On getting mixed with water and applied as a slurry, this product penetrates in pores & capillary of concrete. The combination of alkali silicates and the water & free calcium particles form crystals. After the crystals have formed, these chemicals block the pores and capillaries. Our chemicals find application in treatment of concrete, brickwork and block-work.

Application Areas: These chemicals are used for waterproofing in the areas mentioned below:
Water tanks
Reservoirs
Precast concrete
Tunnels
Underground Vaults
Foundations
Sewage treatment works

Polymeric Formulated Chemical (Polyalk EP)
Antrix holds expertise in offering a wide assortment of Polymeric Formulated Chemical (Polyalk EP). The Polyalk EP offered by us is a polymeric formulation that is effective in strengthening and modifying the micro-structure of cement based hydrated products by forming a polymeric spatial network in its voids, which complement the cement paste characteristics.

Uses:
Repair of RCC members, water tanks & industrial floors
Grouting of RCC members
Finish plastering for brick and block work
Heritage structures rehabilitation
Staircase steps retrofitting, foundation
Grouting
Pipe joints – new and repaired

Advantages:
Polyalk EP increases inter-facial adhesion
Water impermeability tensile and flexural strength
Compensates for volume changes due to shrinkage